Market · Southeast Asia
110 6-Chamber Casement 2.0 for Southeast Asia
The 110 Series 6-Chamber Casement Window 2.0 is configured here for Southeast Asia. The figures below are the published catalogue specification of the series; the market section covers what projects in Southeast Asia add to it. Send the opening schedule and the glazing you want, and the quotation comes back with the dimensional pack.
110 Series 6-Chamber Casement Window 2.0 · Southeast Asia
110 Series 6-Chamber Casement Window 2.0
The 2.0 step-up: 6 chambers, 2.0 mm, same module. The complete configuration, glass options and finish list are on the window series page.
- Opening
- Casement (hinged), multi-point lock
- Profile depth
- 110 mm
- Chamber structure
- 6 chambers, polyamide thermal-break bridge
- Wall thickness
- 2.0 mm
- Insulating glass
- 5 mm - 20 A - 5 mm · single / double / triple
- Sealing
- EPDM foam gaskets, open drainage
- Insect screen
- High-transparency mesh, standard
- Standard finishes
- Thermal transfer: sand grey, coffee · metallic grey int. · RAL and two-tone on request
- Dimensional pack
- Supplied with quotation
Engineering
6063-T5 A-grade primary aluminium · high strength, high crack resistance
Multi-chamber profile body: layered sound insulation, thermal blocking, higher pressure resistance
5 mm insulating glass with integrated bent spacer bars
Thermal-break design forming an effective cold/hot bridge barrier, cutting overall energy use
High-transparency, rust- and corrosion-resistant insect screen · better daylight, stronger insect protection
EPDM foam gaskets, aging-resistant, raising the sealing and water-tightness grades
Drainage design for fast water discharge and easy cleaning
Low-profile glazing bead resists dust build-up, widens the sightline and lifts the wind-load index
Heat, humidity and salt air
Southeast Asian sites push three things at aluminium: sustained heat, high humidity and, on the coast, salt spray. The finish carries the corrosion load, which is why fluorocarbon and powder lines are the standard shortlist for coastal work, with EPDM sealing and open self-cleaning drainage handling the moisture inside the section.
Glazing is specified per project: single glass where cooling load is the driver, insulating units where comfort is. The build-up comes back on the quotation against your climate and the budget line for the envelope.
Ports and logistics for the region
The main ports in the region are covered by standard export packing: modules travel upright, edge-protected, in 20 ft or 40 ft containers, and the loading plan for your opening mix ships with the quotation.
Transit times vary by origin port and destination, so they are confirmed per shipment rather than quoted from a fixed table.
Reference projects in comparable climates
villa · day scene
Coastal villa, pool terrace
Coastal villa with a pool terrace, white volumes and a double garage front.
villa · day scene
Tropical house, deep roof overhang
Deep roof overhangs shade the sliding doors and keep the terrace usable through the wet season.
hotel · day scene
Resort hotel, pool frontage
Low-rise blocks set behind an infinity pool, with framed glazing opening the ground floor to the deck.
FAQ
Frequently asked
Which finishes hold up in coastal Southeast Asia?
Fluorocarbon and anodised lines are the standard shortlist against salt spray. RAL matching and two-tone exterior/interior combinations are available on request.
Do you ship to the Philippines and Malaysia?
Yes. Modules ship to ports across the region in export-standard containers, and the loading plan with the transit confirmation comes with the quotation.
What is the difference between the 110 series 1.4 and 2.0 versions?
The 2.0 version adds a sixth chamber and increases wall thickness from 1.4 mm to 2.0 mm, giving higher section stiffness for larger lights, while keeping the same 110 mm module geometry.
Can we mix the 1.4 and 2.0 versions in one project?
Yes · the module geometry matches, so larger lights can run in 2.0 and standard lights in 1.4 from a single profile order.
Keep going
Series, market and range
Send your opening schedule
Series, glazing and finish come back as one quotation for Southeast Asia, with the full dimensional pack on PDF and CAD on request.