Market · Australia
40 Minimalist Sliding Door for Australia
The 40 New-Minimalism Series Sliding Door is configured here for Australia. The figures below are the published catalogue specification of the series; the market section covers what projects in Australia add to it. Send the opening schedule and the glazing you want, and the quotation comes back with the dimensional pack.
40 New-Minimalism Series Sliding Door · Australia
40 New-Minimalism Series Sliding Door
The wide-opening line of the range: thinner sight-lines, a tri-synchronous three-sash layout, full-height glass. The complete configuration, glass options and finish list are on the door series page.
- Opening
- Horizontal slide, tri-synchronous option
- Profile series
- 40 new-minimalism, per catalogue section drawings
- Aluminium
- 6063-T5 primary aluminium
- Corner joinery
- 45° mitered joints
- Glass (standard)
- Automotive-grade tempered, sound and thermal rated
- Track
- Stainless-steel rail, wear- and corrosion-resistant
- Sash insert options
- Clear · frosted · reeded · fluted · diamond pattern · grille and decorative inlays
- Standard finishes
- Jazz black · jazz snow white · porcelain silver grey · jazz nitrogen-carbon grey · jazz moonlight grey · cream grey
- Dimensional pack
- Supplied with quotation
Engineering
Tri-synchronous three-sashThe 40 line carries a three-sash layout in which all three panels open and close in sync, so a wide opening clears in one motion while the closed face stays a single continuous line.
6063-T5 primary aluminiumThe frame is extruded in 6063-T5 primary aluminium, the same grade as the window line: high toughness, high strength, and resistant to splitting along the whole frame.
45-degree mitered cornersEach corner is mitered at 45 degrees, keeping the face clean and the frame line straight from the top rail down to the floor.
Stainless-steel railThe sashes ride on a stainless-steel rail: wear-resistant, corrosion-resistant, strong on load, and the panels stay on line across the full travel.
What Australian spec writers check
The Australian regime is built on testing, not on brand claims. AS/NZS 1170.2 sets the regional wind-load classification, AS 2047 defines how window and door assemblies are tested against wind load, and AS 1288 classifies the glazing itself. A cyclone-rated specification must therefore state the zone class, the tested configuration and the glazing classification for the exact module size.
Adam Alux does not hold AS 2047 test certificates. Engineering against your zone and module schedule is confirmed at quotation, and a finished test window or door can be produced before the production run.
Shipping to Australia
Modules travel to the major Australian ports in export-standard containers, packed upright with edge protection. The container count for your schedule depends on frame depth and glass build-up, so the loading plan comes with the quotation.
Transit and port handling are confirmed per shipment. For coastal projects, the fluorocarbon and anodised finish lines are the standard shortlist against salt-air exposure.
Projects in Australia
villa · day scene
Terrace house, glass rear extension
The original brick frontage stays intact, with a slim-profile aluminium and glass extension reading as a separate volume.
villa · day scene
Dark-clad villa, timber slat screens
Dark-clad street villa with timber slat screens and a corner sauna pavilion.
commercial · day scene
Commercial hall, dark timber
Commercial hall frontage in dark timber with a deep cantilevered canopy.
FAQ
Frequently asked
Do your aluminium windows and doors ship to Australia?
Yes. Modules ship to the major Australian ports in export-standard containers, with the loading plan for your schedule included in the quotation.
How do you handle cyclone zone specifications?
The zone class and the module schedule drive the specification. Engineering and glazing classification are confirmed at quotation against the AS 2047 and AS 1288 requirements, with a test unit available before production.
What is the 40 new-minimalism sliding door?
It is the wide-opening line of our sliding doors: a slim-frame horizontal slide on 6063-T5 primary aluminium with a stainless-steel rail, and a tri-synchronous three-sash layout that clears the opening in one motion.
How does the tri-synchronous layout work?
Three panels ride one head track and open and close in sync, so a wide opening clears as a single motion. The closed face stays one continuous line, per the catalogue layout.
Keep going
Series, market and range
Send your opening schedule
Series, glazing and finish come back as one quotation for Australia, with the full dimensional pack on PDF and CAD on request.