Market · Australia

Apartment Fire-Rated Door for Australia

The Apartment Fire-Rated Door is configured here for Australia. The figures below are the published catalogue specification of the series; the market section covers what projects in Australia add to it. Send the opening schedule and the glazing you want, and the quotation comes back with the dimensional pack.

Apartment corridor with three single-leaf timber entry fire doors and number plates, design rendering

Apartment Fire-Rated Door · Australia

Apartment Fire-Rated Door

The apartment line is the flat entry door: a single wooden leaf, closed rather than glazed, marked at 20, 45, 60 and 90 minutes. The complete configuration, glass options and finish list are on the door series page.

Door type
Single-leaf fire door, per catalogue drawings
Fire rating
20 / 45 / 60 / 90 min, catalogue test labels
Leaf
Wooden leaf · laminate / HPL / wooden veneer
Core
B1 flame-retardant board with a honeycomb core
Frame
Timber frame, per catalogue section drawings
Certification
AS 1905.1:2015 · AS 1530.4:2014 · EN 1634-1:2014+A1:2018 · CAN/ULCS104 · UL Listed
Ironmongery
Concealed closer · fire-certified viewer · fire-certified electronic lock · latch · lever
Sealing
Intumescent fireproof strip with an automatic door bottom
Application
Apartment entries · hotel guest rooms

APARTMENT FIRE-RATED DOOR · 03
APARTMENT FIRE-RATED DOOR · 04

Engineering

Flat entry leafThe series is drawn as a single-leaf fire door for the flat entry, with the leaf, frame and ironmongery matched to one tested build.

B1 flame-retardant leaf with a honeycomb coreA B1 flame-retardant board sits over a honeycomb core, a build that stays flat on a wide leaf and keeps the swing light for a concealed closer.

Closed face for privacyThe entry leaf is solid rather than glazed, with a fire-certified viewer and a fire-certified electronic lock on the standard schedule.

Accredited fire certificationCompliance is listed to AS 1905.1:2015, AS 1530.4:2014, EN 1634-1:2014+A1:2018 and CAN/ULCS104 with UL listing and the Intertek, CE, BS, IAS, FSC and HKAS marks.

What Australian spec writers check

The Australian regime is built on testing, not on brand claims. AS/NZS 1170.2 sets the regional wind-load classification, AS 2047 defines how window and door assemblies are tested against wind load, and AS 1288 classifies the glazing itself. A cyclone-rated specification must therefore state the zone class, the tested configuration and the glazing classification for the exact module size.

Adam Alux does not hold AS 2047 test certificates. Engineering against your zone and module schedule is confirmed at quotation, and a finished test window or door can be produced before the production run.

Shipping to Australia

Modules travel to the major Australian ports in export-standard containers, packed upright with edge protection. The container count for your schedule depends on frame depth and glass build-up, so the loading plan comes with the quotation.

Transit and port handling are confirmed per shipment. For coastal projects, the fluorocarbon and anodised finish lines are the standard shortlist against salt-air exposure.

FAQ

Frequently asked

Do your aluminium windows and doors ship to Australia?

Yes. Modules ship to the major Australian ports in export-standard containers, with the loading plan for your schedule included in the quotation.

How do you handle cyclone zone specifications?

The zone class and the module schedule drive the specification. Engineering and glazing classification are confirmed at quotation against the AS 2047 and AS 1288 requirements, with a test unit available before production.

What is the apartment fire-rated door?

It is a single-leaf wooden fire door for flat entries and hotel rooms, marked at 20, 45, 60 and 90 minutes and supplied as a leaf, frame and hardware set.

Which fire ratings are available?

The catalogue marks the series at 20, 45, 60 and 90 minutes across the frame and the leaf. Values are catalogue fire ratings, quoted against the opening.

Send your opening schedule

Series, glazing and finish come back as one quotation for Australia, with the full dimensional pack on PDF and CAD on request.