Market · Africa
112 Thermal-Break Casement for Africa
The 112 Series Thermal-Break Casement Window is configured here for Africa. The figures below are the published catalogue specification of the series; the market section covers what projects in Africa add to it. Send the opening schedule and the glazing you want, and the quotation comes back with the dimensional pack.
112 Series Thermal-Break Casement Window · Africa
112 Series Thermal-Break Casement Window
The 112 mm module · five-chamber body, flat profile line. The complete configuration, glass options and finish list are on the window series page.
- Opening
- Hinged sash, multi-point lock
- Profile depth
- 112 mm
- Chamber structure
- 5 chambers, polyamide thermal-break bridge
- Wall thickness
- 2.0 mm
- Insulating glass
- 5 mm - 20 A - 5 mm · single / double / triple
- Sealing
- EPDM foam gaskets, open drainage
- Insect screen
- High-transparency mesh, standard
- Standard finishes
- Thermal transfer: sand grey, coffee (ext.) · metallic grey, sand grey (int.) · RAL and two-tone on request
- Dimensional pack
- Supplied with quotation
Engineering
6063-T5 A-grade primary aluminium · high strength, high crack resistance
Multi-chamber profile body: layered sound insulation, thermal blocking, higher pressure resistance
5 mm insulating glass with integrated bent spacer bars
Thermal-break design forming an effective cold/hot bridge barrier, cutting overall energy use
High-transparency, rust- and corrosion-resistant insect screen · better daylight, stronger insect protection
EPDM foam gaskets, aging-resistant, raising the sealing and water-tightness grades
Drainage design for fast water discharge and easy cleaning
Low-profile glazing bead resists dust build-up, widens the sightline and lifts the wind-load index
Specifying for heat and value
African projects are usually specified against two drivers: heat, and the total landed cost of the glazing line. Single-glass build-ups cut weight and freight in the container; insulating units step in where comfort or acoustics are required. Both run on the same frame, so the build-up is a line on the quotation, not a different product.
Wall thickness and finish are the second lever. The 6063-T5 sections in the range are extruded in-house, and the anodised and thermal-transfer finish lines are the standard shortlist.
Full-container loading
The container is the unit of supply: a full box of modules for one phase, packed upright with edge protection, with the loading plan drawn against your opening schedule.
Transit to the port of discharge, and the documentation for clearing, travel with the shipment. Transit times are confirmed per route at quotation.
Projects in Africa
villa · day scene
Two-storey villa, timber eaves
Two-storey villa with deep timber eaves over a stone plinth and pool.
villa · day scene
White villa, black frames
White villa with black window frames, shown from the garden and the entrance.
villa · night scene
Modern villa at night
Modern villa rendered at night: light lines under the eaves and a lit gate front.
FAQ
Frequently asked
Do you ship to West and East Africa?
Yes. Full-container loading is the standard supply unit, and the loading plan for your opening schedule comes with the quotation.
Can we mix single and insulating glass in one container?
Yes. The glazing build-up is specified per opening on the schedule, so one container can carry both configurations; the mix is confirmed in the loading plan.
What insulating glass is standard on the 112 series?
5 mm-20 A-5 mm insulating glass, the same build-up as the 110 line · with single, double and triple glazing configurations available.
How does the 112 differ from the 110 series 2.0?
The 112 adds 2 mm of profile depth and a flat profile line to the 110 module, at the same 2.0 mm wall and the same standard 20 A glass build-up; the 110 2.0 keeps the 110 mm module for projects that must hold the existing layout.
Keep going
Series, market and range
Send your opening schedule
Series, glazing and finish come back as one quotation for Africa, with the full dimensional pack on PDF and CAD on request.