Market · Southeast Asia
35X48 Sliding Door for Southeast Asia
The 35X48 Medium-Narrow Series Sliding Door is configured here for Southeast Asia. The figures below are the published catalogue specification of the series; the market section covers what projects in Southeast Asia add to it. Send the opening schedule and the glazing you want, and the quotation comes back with the dimensional pack.
35X48 Medium-Narrow Series Sliding Door · Southeast Asia
35X48 Medium-Narrow Series Sliding Door
The middle tier of the sliding range: a frame drawn thicker than the 35X16, more glass, eight finishes. The complete configuration, glass options and finish list are on the door series page.
- Opening
- Horizontal slide, medium-narrow sash
- Profile series
- 35X48 medium-narrow, per catalogue section drawings
- Aluminium
- 6063-T5 primary aluminium
- Corner joinery
- 45° mitered joints
- Glass (standard)
- Automotive-grade tempered, sound and thermal rated
- Track
- Stainless-steel rail, wear- and corrosion-resistant
- Sash insert options
- Clear glass · grille bars · decorative inlays
- Standard finishes
- Jazz black · jazz glazed white · porcelain silver grey · Brazilian pear wood · fluorocarbon grey · fluorocarbon metal coffee · champagne gold · tech wood
- Dimensional pack
- Supplied with quotation
Engineering
Thicker frame than the 35X16The catalogue draws the 35X48 frame and sash thicker than the minimalism line, so the sight-line stays slim while the profile carries a wider glass field and reads quieter in the room.
45-degree mitered cornersEach corner is joined at 45 degrees, which the catalogue cites for a clean face and a solid joint; the line runs smooth from the head rail to the floor.
Automotive-grade tempered glassEvery sash leaves the factory with automotive-grade tempered glass, adding sound insulation, thermal comfort and safety to the glazed panel.
Stainless-steel railThe rail is stainless steel: wear- and corrosion-resistant, strong on load, and the sash stays on its line through repeated cycles instead of working loose.
Heat, humidity and salt air
Southeast Asian sites push three things at aluminium: sustained heat, high humidity and, on the coast, salt spray. The finish carries the corrosion load, which is why fluorocarbon and powder lines are the standard shortlist for coastal work, with EPDM sealing and open self-cleaning drainage handling the moisture inside the section.
Glazing is specified per project: single glass where cooling load is the driver, insulating units where comfort is. The build-up comes back on the quotation against your climate and the budget line for the envelope.
Ports and logistics for the region
The main ports in the region are covered by standard export packing: modules travel upright, edge-protected, in 20 ft or 40 ft containers, and the loading plan for your opening mix ships with the quotation.
Transit times vary by origin port and destination, so they are confirmed per shipment rather than quoted from a fixed table.
Reference projects in comparable climates
apartment · day scene
Apartments, recessed balconies
White volumes with deep recessed balconies and vertical sunshades cut the direct sun before it reaches the glass.
villa · day scene
Townhouse, timber screens
A compact two-storey volume around a planted courtyard, with timber screens filtering the street side.
villa · day scene
Coastal villa, grass frontage
Coastal villa with a dark roofline, glass entry and three facade elevations.
FAQ
Frequently asked
Which finishes hold up in coastal Southeast Asia?
Fluorocarbon and anodised lines are the standard shortlist against salt spray. RAL matching and two-tone exterior/interior combinations are available on request.
Do you ship to the Philippines and Malaysia?
Yes. Modules ship to ports across the region in export-standard containers, and the loading plan with the transit confirmation comes with the quotation.
What is the 35X48 medium-narrow sliding door?
It is the middle tier of our sliding range: a horizontal slide on 6063-T5 primary aluminium, with a frame drawn thicker than the 35X16 minimalism line, a stainless-steel rail and eight catalogue finishes.
How does it compare with the 35X16 and the 40?
The 35X16 is the thinnest sight-line; the 40 adds the tri-synchronous three-sash layout. The 35X48 sits between them with a thicker frame, more finishes and grille or decorative inlays in the same frame.
Keep going
Series, market and range
Send your opening schedule
Series, glazing and finish come back as one quotation for Southeast Asia, with the full dimensional pack on PDF and CAD on request.